2200 mm Battery Ride-On Industrial Sweeper

Overview

Built for industrial floors

Industrial sites punish floor cleaners: sand, offcuts, packaging scraps and fine dust. This ride-on sweeper has a 2200 mm sweep width and four 500 mm brushes, so one pass clears a wide strip. The 220 L dustbin takes the load, and the 200 L cistern with a fog gun keeps dust from rising.

Power and weight

A 3000 W motor drives the machine from a battery pack. The unit is 2500 mm long, 2200 mm wide and 2580 mm high, and weighs 1600 kg. Plan for a flat, firm floor and a charger location near the parking spot.

Our line-up, side by side

• 1200 mm model: small, for yards and aisles.
• 2000 mm model: quiet campus sweeper with four side brushes.
• This 2200 mm model: heavy industrial duty with the largest dustbin among our ride-on units.

Configuration options

• Battery voltage and capacity, set before production
• Fog gun and cistern layout
• Guarding, lights and beacon for factory safety rules

Photos or drawings of your floor layout, and the turning space around racks or machines, let us check that the machine fits before you commit.

Before you order

Operators on industrial sites usually care most about downtime. Wear parts such as brushes, filters and seals can be listed with the quotation, so a worn brush never stops a shift while you wait for a new one.

Our 2200 mm models side by side

This sweeper and the wet-and-dry 2200 mm model (MM-RS22V) share the same frame, brushes and 130 bar fog gun. We position them differently. This one is the industrial version: it is meant for plant yards, factory floors, warehouses, ports and large depots where the surface is hard and the dust is heavy and the machine works in long, regular passes.

The wet-and-dry model is aimed at parks and streets where dust suppression matters as much as pickup. Check which one fits your application, then look at the options.

Compared with the 2000 mm campus sweeper (MM-RS20V), this machine has a bigger 220 L bin, a 3000 W motor and a fog gun, but it is heavier at 1600 kg and taller at 2580 mm, so check door and gate heights. The 2500 mm machine (MM-RW25V) is wider again and carries cargo. The 1200 mm model (MM-RS12V) fits narrow aisles.

Choose this one when your site is large, industrial and dusty.